Home/Services/Field Mowing

Field Mowing in Lebanon, Oregon —
Pasture & Acreage Mowing

Tall pasture, fence lines that disappeared into the brush, fields that haven't been touched in a couple of seasons — knocked down clean with a skid-steer brush cutter. Same job most folks call "tractor mowing," done with a tool that handles tougher growth.

Field Mowing

Knock it back
before it gets out of hand.

Field mowing is the in-between job. It's not heavy land clearing (no stumps, no debris haul, no follow-up grading). It's not yearly land management (that's a relationship, not a one-shot). Field mowing is just: there's a field, the grass and brush are too tall, knock them down — usually before fire season, sometimes after.

What we mow

  • Pasture and hay ground not currently in active grazing or harvest — fields that have been let go for a season or two.
  • Fence lines where blackberry, scotch broom, and grass have grown into the wire and over the line.
  • Field edges and woods edges where the brush is creeping in from the perimeter.
  • Vacant lots on rural properties — the back acre, the unused corner, the strip you can't easily get a tractor onto.
  • Small acreage owned by absentee or seasonal owners who need an annual knock-down to keep the place from going feral.
  • Fire fuel reduction — grass and brush mowed back to reduce wildfire risk before summer (see also firebreaks).

Tractor mowing vs. skid-steer mowing

If you've been told you need "tractor mowing" or "tractor mowing service," what you usually need is exactly what we do — just done with a skid steer instead of a tractor. The skid-steer brush cutter handles heavier brush, gets into tighter corners, and works on slopes a wheeled tractor with a brush hog would tip on. For genuine open-field hay-cut work, a tractor's still better. For everything else most rural-residential property owners actually call about, the skid steer is the right tool.

What gets left behind

Mowed-down stubble, a few inches off the ground, with the cuttings mulched in place. The mulch decomposes over a season and feeds the soil. No haul-out, no burn pile — just a freshly mowed field. If you want the cuttings hauled out, that's a separate add-on (and rarely worth it for pasture work).

Mowing as yard debris prevention

A neglected pasture eventually becomes a yard debris problem — tall grass collapses into thatch, brush takes over, branches accumulate, and what was once an open field turns into something you can't walk through. A yearly or twice-yearly mow keeps the property from getting there. Cheaper than a one-time clearing job that has to undo five years of neglect, and far cheaper than the haul-out that comes with it. For properties already past that point, see brush clearing first; for ongoing yard debris and brush cleanup as part of a maintenance plan, see land management.

When to do it

Best window is late spring through early summer, before grass dries out and ODF restrictions kick in for fire season. Late winter is fine if the ground's firm enough for the machine. Mid-summer cuts work too but we follow ODF's industrial fire restrictions during high or extreme fire-danger windows. Fall is doable if the rains haven't saturated the ground yet.

Pairs naturally with

If your "field" is actually a wall of blackberry, you want brush clearing first. If you want this work done every year without having to call, that's land management. If you're trying to reduce wildfire fuel specifically, see firebreaks. And if mowing reveals stumps in the field, we can pull those too — see stump removal.

Where We Work

Field mowing in Lebanon and across Linn County.

We mow pasture and small acreage in Lebanon, Albany, Corvallis, Salem, Sweet Home, Brownsville, Jefferson, Scio, Tangent, Halsey, Harrisburg, and the rural acreage between them. See the full service area for distances.

FAQ

Common questions about field mowing.

Is this the same as land clearing or brush clearing?

Field mowing is the lighter cousin of brush clearing. Land clearing handles trees, stumps, and heavy brush from raw lots. Brush clearing is heavy first-time blackberry/scrub work. Field mowing is what you do on already-cleared pasture once a year (or twice) to keep grass and light brush knocked back. Same machine, different intensity, different price.

Can you mow my hay field?

Mowed pasture for grazing or fire fuel reduction — yes. Mowed-and-baled hay for harvest — no. We don't run a sickle bar or hay rake. If you need hay cut to be baled, you want a tractor with hay equipment, not us.

How tall can the grass be when you cut?

The skid-steer brush cutter handles waist-high or taller pasture in one pass, including embedded brush, blackberry runners, and saplings up to about 3–4" diameter. If your field is genuinely overgrown — chest-high, dense thicket — that's brush clearing, not field mowing.

How often should I mow my acreage?

Depends on what you want. Once a year (typically spring) keeps a pasture from sliding into brush. Twice a year (spring and late summer) keeps it actually grazable and reduces wildfire fuel. Every other year is the bare minimum before you start losing ground to invasives.

Field need a mow?

Send a photo when you call. Acreage estimate + photo = quote in 24 hours.